INDU-TECH
INDU-TECH
indu-tech manufacture a unique isolation valve that operate in the toughest applications including: Pulp and Paper, Steam Plants, Oil and Gas, Petrochemical, Chemical, Food and Beverage, Pharmaceutical, Waste Water Treatment and more

The indu-tech team understands comprehensively the challenges industrial tank operations face. They know how safety, efficiency and accuracy are critical priorities when measuring tank levels. And that’s why Indu-Techs engineering and design team devised a universal mounting system for our isolation valve.
Adam Equipment was established in 1972 with the goal to provide quality weighing equipment and services at affordable prices, offering superior value to its customers. Today the company is still privately held and operated by one of the founding partners: Alan Storey.
Adam scales and balances are sold throughout the world, supported by a diversified network of distributors. The company’s products are available through e-commerce, catalogue distribution and independent dealers, who can provide additional application sales and technical service.
Adam’s distribution channel is maintained by wholly owned facilities strategically located in Europe, North America, Africa, Asia and Australia. These locations provide technical, warehouse, sales and marketing assistance to all of its customers. Adam Equipment is an ISO 9001 manufacturer with research and development based in the UK head office. The company meets or exceed most international manufacturing standards and regulations.
You will find Adam products in the scientific, medical, educational, industrial, manufacturing and retail sectors, to mention just a few. Customers rely on Adam Equipment to provide them with consistent and accurate results.

Universal Bolt Patterns for All Situations
The indu-tech standard valves have an ANSI bolt pattern that apply to 2”, 3”, 4”, 150lb, 300lb, 600lb and 900lb valves. In addition, the valves are built to DIN Standards 50, 80 and 100 to PN 10, PN 16, PN 24 and PN 40.

No More Leaks
For tanks with former knife gates used for isolation, Indu-tech incorporated DS offset holes to match the knife gate bolt pattern. Before the true indu-tech Isolation Valve was developed, the standard knife gate valves used in isolation applications leaked passed the gate and the packing gland. This invariably caused leakage at the tank and, in some cases, caused safety hazards involving highly corrosive materials and contamination. In addition, most valves experienced excessive corrosion occurring at the valve support stem.
Rather than change all the tank flanges with the former knife gate bolt pattern, indu-tech has managed to incorporate the non-standard bolt pattern into our valve. Thus, you have bubble tight safety and standard off-the-shelf universal mounting.
Instrument Side Purge
indu-tech has incorporated a Level Transmitter instrument side purge. After the valve is flushed clean with the primary purge port, the valve is closed. Metered air is applied to the Transmitter side of the Instrument. This allows for the full calibration of the Level Transmitter while in situ.
This eliminates the costly expense of emptying the tank, removing the Level Transmitter and taking it back to the instrumentation to be put on a test bench for re-calibration. An accurate and reliable system when you really need to know what your process is telling you.
Rather than change all the tank flanges with the former knife gate bolt pattern, indu-tech has managed to incorporate the non-standard bolt pattern into our valve. Thus, you have bubble tight safety and standard off-the-shelf universal mounting.


Bubble Tight Seal
Wafer Style Ball Valve
A key factor in the success of the indu-tech Isolation Valve was the implementation of the Wafer-Style Ball Valve. This attribute is a key factor in keeping a level transmitter as close to the tank flange as possible.
Keeping the transmitter close to the flange has been a persistent challenge for industrial liquid processing and storage operations and for obtaining accurate level measurement. Accuracy in measurement is vital for safety and efficiency. indu-tech’s wafer-style ball valve has solved this issue.


Quarter Turn ON/OFF
indu-tech’s Isolation Valve features a simple quarter turn ON/OFF design. This simplifies movements of internal components and significantly decreases the chance of a jam. It is not susceptible to corrosion or contaminants that cause valve stems and brackets to corrode and seize, becoming inoperable over time.
Swirl Purge
Maintaining a clean passage from the level transmitter to the process medium is paramount to a well-functioning system. Over time, most tanks collect sediment at the base. Indu-Tech’s unique Swirl Purge allows operators to clean the tank mounting pipe and keep a clean passage to the Level Transmitter.

Contact Us Now
Head Office
35 Western Parkway Business Centre
Ballymount Drive, Dublin 12
D12 X542, Ireland
Cork Office
33a Mitchelstown Enterprise Centre Mitchelstown, Co. Cork
P67 X660, Ireland
T +353 450 5050
contact@bonner.ie